Instructions for configuring a Westell DSL modem, models 2100/2200/6100 (Models A90-210030-04, B90-220030-04, B90-610030-06 and C90-610030-06, respectively) to Bridged Ethernet.

First connect the Westell DSL modem directly to the computer via the Ethernet cable (RJ-45) making sure that you have connection to the Internet before beginning. Then open Internet Explorer to access the Westell Interface and enter "192.168.1.254" or "launchmodem" in the address field.

You should get a the following display (or one very similar, depending on the firmware version).

Click on Expert Mode from the menu and confirm that you want to enter Expert Mode.

You should see the following display below after entering Expert Mode.

Click on Configure from the menu on the left and then Connection in the sub-menu. Select "Bridged Ethernet" from the Protocol selection drop down box. Click on Save and restart the connection at the bottom. This will automatically restart the modem and the interface will return after the changes are saved. Now the Westell DSL Modem will be in Bridge Mode.